Chamber Kilns with Drawer Bottom or as a Bogie
The chamber kiln of NW model series combines the attractive quality advantages of the proven models N 150 – N 1000/H with an outstanding product characteristic which substantially simplifies charging.
With a drawer mechanism (NW 150 – NW 300/H) the kiln table can be easily pulled out. The larger models NW 440 – NW 1000/H are designed as shuttle kiln with completely free traversing bogie. Free access in front of the kiln allows for a simplified and clear charging the kiln.
- Dual shell housing
- Front made of textured stainless steel
- Environment-friendly, long-life powder-coating of housing
- Rugged, self-supporting, vaulted arch construction
- Controller mounted on kiln door and removable for comfortable operation
- Multi-layer insulation with light-weight refractory bricks and high-quality, energy-saving backing insulation
- Lightweight refractory bricks inside kiln chamber for clean firing results
- Dual shell door with long-live sealing
- Kiln table can be easily pulled-out (NW 150 – NW 300/H)
- From model NW 440 bogie on four castors (two with brakes) which can be pulled out completely. Accession assistance and removable drawbar for bogie
- Door sealing grinded by hand (brick on brick); NW 150 – NW 300/H
- Door is adjustable
- Door safety switch shuts down power to the elements when the door is opened
- Heating from five sides with special arrangement of heating elements for optimum temperature uniformity
- Heating elements of support tubes provide for free radiation of the heat
- Solid state relays provide for low-noise operation
- Rapid switching cycles result in precise temperature control
- Type S thermocouple
- Air inlet flap with integrated residual drying function closes the air inlet at a temperature which can be set in the controller for NW 150 – NW 300/H
- Exhaust air outlet in the ceiling, manual exhaust air flap for models NW 440 – NW 1000/H
- Delivery incl. pipe connection for connecting an air outlet with 80 mm diameter for NW 150 – NW 300/H
- SiC-floor plate protects floor elements and provides a level setting surface
- Base included in delivery (NW 150 – NW 300/H). Fixed base for larger models.
- Comfortable charging height with base of 800 mm (NW 440 – NW 1000/H = 500 mm)
- Defined application within the constraints of the operating instructions
