- Large easy to read TFT display for better image quality and easy navigation
- Integrated weighing funktion
- Torque trend measurement indicates changes in product viscosity
- Integrated pH sensor connection
- RS 232 and USB interface to operate the unit with the laboratory software labworldsoft
- Standard joint fittings on the lid: 2 x NS 29, 2x NS 14, 2 x GL 14 for flexible adaptation of further equipment
- Expandable for use with the ULTRA- TURRAX® T 25 digital (Accessory)
- Vacuum valve included with delivery
- Anchor stirrer with PTFE-scrapers
- Connections to attach a cooling source to the back of the unit
- Manual adjustable safety circuit
- Integrated safety shutdown when vessel or lid is removed from the base
| Usable volume max. | 1000 ml |
| Usable volume with disperser tool min. | 300 ml |
| Usable volume without disperser tool min. | 500 ml |
| Working temperature max. | 120 °C |
| Attainable vacuum | 25 mbar |
| Viscosity max. | 100000 mPas |
| Speed range | 10 – 150 rpm |
| Support rod diameter (with integrated fastening on stand) | 16 mm |
| Material in contact with medium | AISI 316L, 1.4571, borosilicate glass 3.3, PTFE, PEEK, FKM |
| Reactor vessel openings (units/standard) | 2x NS 29/32, 2x NS 14/23 & 2x GL 14 |
| Permissible ON time | 100 % |
| Temperature measurement resolution | 0.1 K |
| Nominal torque | 3 Nm |
| Heat output | 1000 W |
| Cooling medium permissible operating pressure | 1 bar |
| Weighing range max. | 2000 g |
| Weighing resolution | 1 g |
| Speed min (adjustable) | 10 rpm |
| Heating temperature max. | 180 °C |
| Adjustable safety circuit, upper temperature value | 225 °C |
| Adjustable safety circuit, lower temperature value | 47 °C |
| Adjustable safety circuit, upper temperature value deviation | 20 ±K |
| Adjustable safety circuit, lower temperature value deviation | 10 ±K |
| Cooling medium temperature min. | 3 °C |
| Set temperature resolution | 1 ±K |
| Heat control accuracy of medium with sensor | 0.2 ±K |
| Speed deviation | 5 ±rpm |
| Speed display | TFT |
| Heat control | TFT |
| Connection for ext. temperature sensor | PT 100 |
| Stirring element fastening | special output shaft |
| Torque display | yes |
| Torque measurement | trend |
| Timer | yes |
| Timer display | TFT |
| Speed control | 1 RPM steps |
| Type of cooling | flow |
| Temperature display | yes |
| Working temperature sensor | PT 100 |
| Safety temperature sensor | PT1000 |
| Working temperature display | TFT |
| Safety temperature display | TFT |
| Display for operation with ext. sensor | yes |
| Safety cutout | yes |
| Reversible direction of rotation | no |
| pH meter interface | yes |
| pH value display | TFT |
| Dimensions (W x H x D) | 443 x 360 x 295 mm |
| Weight | 16 kg |
| Permissible ambient temperature | 5 – 40 °C |
| Permissible relative humidity | 80 % |
| Protection class according to DIN EN 60529 | IP 21 |
| RS 232 interface | yes |
| USB interface | yes |
| Analog output | no |
| Voltage | 230 / 115 V |
| Frequency | 50/60 Hz |
| Power input | 1200 W |
