SNOL 3/1100 ashing furnace with vacuumed ceramic fiber chamber, is designed for ashing and burn off processes up to 1100°C. Fan-assisted chimney permits to eliminate smokes from chamber during process time.
BASIC MODEL
- One piece high thermal efficiency, vacuum-formed ceramic fiber chamber
- Heating elements, embedded in a vacuum formed fiber, are inside four walls of the chamber
- Fan-assisted chimney for smoke and humidity extraction
- Continuous air change in the chamber
- Door opens upwards
- Door safety interlock switch
- Microprocessor – temperature controller
- Outside casing – metal sheet, powder painted grey
- High quality, ecological thermal insulation material
- Low electric power consumption
- Short heating up/cooling down period
- High degree of accuracy
- 1 year warranty
OPTIONS
- Process observation window (o 35 mm) up to 1100 °C
- Additional ceramic hearth plates
- Buzzer
- Protection against overheating
- Data recorder
- Data communication/USB
- Calibration of temperature measurement system
- Additional 1 year warranty
Specification
Technical data | Dimension | SNOL 3/1100 LHM21 |
Useful volume | Liter | 3 |
Rated power not more than | kW | 1.7 |
Rated supply voltage | V | 230 |
Rated frequency | Hz | 50 |
Number of phases | – | 1 |
Continuous operating temperature | °C | T+10-1100 |
Maximum temperature | °C | 1100 |
Working chamber material | – | Fiber muffle |
Maximum heating- up time (without charge) | Min. | 35 |
Temperature stability in working chamber at rated temperature in thermal steady state without charge not more than | ± °C | 1 |
Temperature uniformity in working space at rated temperature in thermal steady state without charge not more than | ±°C | 10 |
Furnace working chamber dimensions: | ||
width mm | mm | 120 |
depth mm | mm | 200 |
height mm | mm | 105 |
Furnace external dimensions: | ||
width mm | mm | 345 |
depth mm | mm | 520 |
height mm | mm | 430* |
Mass | kg | 17 |
* – should increase by 20-85 mm, depending on the chimney